NEMO 1/2 S X-Industrie

Display unit
Dosing unit
Transmitter
Temperature control unit
Sample bottle distribution
Homogenizer
Weighing system

The industry solution for the determination of wastewater costs and for the early detection of incidents

Advantages

The NEMO industrial version is a specialist for sampling and on-line measurement for industrial and process wastewater
the large collection vessel allows representative sampling volumes to be drawn at very short intervals with the peristaltic pump module
the weighing system allows constant control of the representative sampling function. malfunctions are detected immediately and faulty laboratory analyses are avoided
the integrated homogenizer mixes the samples and distributes them in accordance with DIN directly on site to the prepared laboratory bottles
the floating plate reduces the outgassing of volatile substances
combined with the process analyzer, various on-line sensors can be connected and sampling can be triggered in case of an event
with various water totalizers
the integrated logger allows the evaluation of historical measurement and sampling data. With the optional LTE modem, these can also be transferred wirelessly via e-mail, FTP and directly to the Ori Mcloud.
with monitored temperature control unit
ATEX certified for zones 1 and 2

Display unit

large OLED display
Operation with magnetic pen
Scratch and shock resistant safety glass
LED status bar
See the status from a distance
Check representative sampling-only when LED is green, laboratory analysis is worthwhile
RS485 & USB
Bluetooth

More than just a display unit

Mobile 8GB USB Storage - Sampling and measurement data can be read on-site at the instrument and transferred to the display memory
Transfer data to office computer via USB or Bluetooth connection
Display unit can also be installed up to 30m away from the device. Also important when installing the devices in the sewage shaft.
Hot swap capable even in the Ex area- with only one display can be operated several devices

Dosing unit

Optimized for a wide range of sampling tasks

Peristaltic pump

Variable dosing volume from 20-26000ml
Proven peristaltic pump for CTCV, CVVT, CTVV and event sampling
especially economical
minimal contact of sample media with foreign materials
No heel behavior of heavy particles during dosing
protective sampling for highly volatile substances
especially suitable for event sampling (also larger volumes with only one dosing up to 26000ml)
Sampling also possible at overpressure up to 1bar
Parallel sampling
Diverse start options, up to 3 alarm limits per connected sensor, prepared for iSampling 4.0
ATEX certified acc. to II 2G IIB T4 for use in sewage shafts

Vacuum diaphragm pump

fixed dosing volume adjustable from 15ml - 250ml (multiple dosing possible)
with vacuum diaphragm pump for CTCV, CVVT and event sampling
highest dosing accuracy even with changing delivery heights up to max. 8m
parallel sampling
various start options, up to 3 alarm limits per connected sensor, prepared for iSampling 4.0
ATEX certified acc. to II 2G IIB T4 for use in sewage shafts

Hybrid system

combines the advantages of peristaltic and vacuum diaphragm pump technology
fixed dosing volume adjustable from 10 - 100 ml, variable dosing volume from 20-26000ml
for CTCV, CVVT, CTVV and event sampling
highest dosing accuracy even with changing delivery heights
highest dosing accuracy even without using a water detection sensor / conductivity independent
possibility of immediate event sampling with dosing volume up to 26000 ml
automatic switching between fixed and variable dosing
parallel sampling possible
no complex valve and pump technology
sampling also possible at overpressure up to 1bar
easy to maintain
various start options, up to 3 alarm limits per connected sensor, prepared for iSampling 4.0
ATEX certified acc. to II 2G IIB T4 for use also in hazardous areas such as sewage shafts

Valve system

enables sampling from pressure lines up to 12-19 bar (depending on temperature range)
pneumatically controlled ball valves for CTCV, CVVT and event sampling
highest dosing accuracy with fixed dosing optionally 15ml, 45ml, 90ml
nominal widths DIN DN 25 - DN 80
for horizontal or vertical installation
optionally in stainless steel 1.4408 or in EN GJS 400-LTU
PFA lining (conductive) also with FDA approval
highest dosing accuracy even without using a water detection sensor / conductivity independent
various start options, up to 3 alarm limits per connected sensor, prepared for iSampling 4.0
ATEX certified acc. to II 2G IIB T4

Atex certified premium transmitter

10-channel measuring device with logger function for the measured variables pH, ORP, conductivity, oxygen, temperature, level, weight, water detection sensors, temperature and pressure sensors of the CEX1/2 cooling units...
for monitoring processes even in hazardous areas of zone 1+2.
sensors often even zone 0
offers various trigger possibilities for event proportional 4.0 sampling
in shock-resistant plastic housing or in stainless steel design in combination with the NEMO dosing module
mobile with battery unit or stationary as wall- or pole-mounted unit or integrated in the NEMO sampler
Data transmission via RS 485, USB, Bluetooth or integrated 4G (LTE) modem

Intelligent process sensors

Plug and Play connection of up to 4 digital ISM Mettler Toledo or EOG sensors to the NEMO transmitter in parallel possible.

With predictive maintenance and sensor diagnostics
The predictive maintenance features of the NEMO Transmitter provides diagnostic functions for the Mettler Toledo ISM sensors, such as a dynamic life indicator (DLI). This information reduces the need for maintenance as well as the risk of unplanned downtime due to unexpected sensor defects. You will be informed when maintenance or calibration of the ISM sensors is required.

Temperature control unit

efficient cooling/heating unit
controller controlled, operable via the display unit
with various sensor monitoring, indoor, outdoor temperature, coolant pressure, speed monitoring of motor drive/fan.....
with door sensor,
LED illumination for sampling interior
Temperature logging with various alarm functions
ATEX certified acc. to II 3G IIB T4 for zone 2 or II 2G IIB T4 for

Probenflaschenverteilung

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

Homogenizer / Weighing system

The integrated homogenizer prevents heavy particles from settling and allows direct sample division according to DIN 38402-30.
The integrated industrial scale allows the filled dosing quantities to be checked to the gram. Errors during sampling can thus be detected directly.

Homogenizer / Weighing system

The integrated homogenizer prevents heavy particles from settling and allows direct sample division according to DIN 38402-30.
The integrated industrial scale allows the filled dosing quantities to be checked to the gram. Errors during sampling can thus be detected directly.