NEMO T Transmitter

ATEX-CERTIFIED TRANSMITTER WITH DATA LOGGER.
OPTIONAL WITH LTE MODEM AND SAMPLING FUNCTION

The NEMO T Transmitter is an ATEX-certified multiparameter transmitter that has been specially developed for use in potentially explosive atmospheres. With up to ten channels, it supports a wide range of sensors – from analogue and ISM to RS485 and Bluetooth interfaces. This gives you maximum flexibility for a wide variety of applications in the water and wastewater sector.

In addition to pure data acquisition, the NEMO T can be expanded with an intelligent sampling function on request. In combination with LTE or RS485 communication, the system enables seamless recording, transmission and evaluation of all measurement and sampling data – reliably and in real time.

Thanks to its robust design, simple operation and integrated safety functions, the NEMO T is the ideal solution for operators who want to ensure safety, precision and efficiency in critical environments. In addition, the connection to the ORI Mcloud provides a convenient overview of all measuring points – anytime, anywhere.

Version 1
Standard design

Version 2
ATEX certified design
(Zone 1)

Advantages of the NEMO T transmitter

ATEX/IECEx certified – safe operation even in potentially explosive atmospheres
Multi-parameter capability – up to 10 channels for different sensor types
Easy integration of sampling functions and mobile display units
8 GB internal memory for extensive data recording
Flexible communication via LTE, RS485, USB or Bluetooth
User-friendly operation with OLED display, magnetic pen and LED status indicator
Compatible with ORI Mcloud for centralised data collection, evaluation and worldwide access
Event-driven sampling when limit values are exceeded or alarms are triggered
Hot-swap capable – one display unit can control multiple devices

Request NEMO T

[Translate to Englisch:] NEMO T Transmitter

Product Gallery

Downloads

Data Sheet (PDF) Brochure Accessories & Sensors

NEMO T Transmitter –
flexible, secure, intelligent

The NEMO T transmitter combines maximum safety with state-of-the-art measurement technology. It reliably monitors all relevant parameters, supports a wide range of sensors and impresses with its ATEX certification for potentially explosive areas.

Versatile, intuitive to use and connected at all times – the smart solution for precise measurements and sampling in the water and wastewater sector.

Enquire about NEMO T +49(0) 5703 / 51010

Multiparameter

The NEMO T Transmitter is designed for versatile measurement tasks and supports up to ten channels. In addition to classic analogue inputs, modern ISM sensors, RS485 modules and Bluetooth sensors can also be connected. It thus reliably covers a wide range of parameters such as pH, redox, oxygen, conductivity and temperature.

All sensors are centrally recorded, controlled and documented. This allows users to maintain an overview at all times without having to operate several devices in parallel. The flexible combination of different sensor types makes the NEMO T a true all-rounder for a wide range of applications.

Whether in municipal sewage treatment plants, industrial processes or for special measurements in the field, the multi-parameter transmitter ensures precise results and a high degree of adaptability to individual requirements.

4× ISM-Sensoren für pH/Redox, gelösten Sauerstoff, Leitfähigkeit und Temperatur

2× analoge Sensoren (aktiv/passiv, 0/4–20 mA) z. B. für Füllstand, H₂S (Flüssigphase), TOC (Gas) oder andere

4× RS485-Anschlüsse für Probenahmemodule, Mettler-Toledo-Waagen oder kundenspezifische Sensoren auf Anfrage

1× Bluetooth-Schnittstelle für ein Dräger PAC-Gerät, z. B. H2S, SO2 oder O2

Easy integration of sampling

The NEMO T Transmitter can be expanded into an intelligent sampling system in just a few simple steps. Different sampling types – whether time-, quantity- or event-controlled – can be implemented flexibly and deliver representative results at exactly the right moment.

Thanks to modern communication via LTE or RS485, measurement and sampling data are transmitted reliably. Samples can even be started, stopped or queried via text message. The NEMO T thus combines precise measurement technology with convenient remote control.

Whether in municipal networks, industrial applications or special environmental measurements, the transmitter offers a safe and efficient solution that combines sampling and data acquisition in a single device.

Easy to use

About the display unit

Clear OLED display
Operation with magnetic pen
Scratch- and impact-resistant safety glass
LED status bar – status can also be seen from a distance
Sample control at a glance:
Only when the LED lights up green is the sample representative – a laboratory analysis is worthwhile
USB interface
Bluetooth function

Much more than just a display unit

Mobile 8 GB USB storage unit
Sampling and measurement data can be read directly on site at the device and stored in the display memory
Data transfer to an office PC via USB or Bluetooth
Flexible display placement: display unit can be installed up to 30 m away from the device
Hot-swap capable – even in hazardous areas: multiple NEMO T devices can be operated with just one display unit

Data recording and transmission

With 8 GB of internal memory, the NEMO T offers sufficient capacity for the complete documentation of all connected sensors. Event-driven recordings can be implemented as well as continuous measurement series.

Various transmission options are available: wired via RS485 or wireless via LTE modem. This ensures that all data is reliably transmitted to central systems – in real time and regardless of location.

Via RS485 interface

Measurement log and sampling data can be transferred
Connection to industrial PLC solutions possible

Measurement data logging

All measurement and sampling data is reliably documented. These logs can be integrated directly into higher-level systems such as PLCs via the RS485 interface.

This enables seamless integration into industrial processes – with precise data that is available at all times and can be processed flexibly.

Communication

The NEMO T Box can be optionally equipped with a 4G (LTE)/2G modem. ATEX-certified according to II 2G IIB T4, it is suitable for use in Zone 1 – e.g. directly from the manhole or other potentially explosive areas. Data transmission is time-controlled or event-based – via email, FTP, SMS or directly to the ORI Mcloud. Sampling and status queries can be conveniently triggered via SMS.

Open system – no manufacturer restrictions

You can use your own SIM card
You choose your preferred mobile phone provider yourself
You configure your own SMTP and APN settings

ORI Mcloud

Central web portal for your measurement and sampling data

Recording measurement and sampling data only makes sense if it can be displayed in a timely, clear and understandable manner. This is exactly what ORI Mcloud does. Using your web browser – without any additional software – you can access and control your registered ORI transmitters, samplers and Dräger gas detectors worldwide. Device status, measurement history and samples taken are clearly displayed – sorted by measuring points. And all this conveniently from anywhere you have access to the internet.

More about Orimcloud

Advantages

Direct access to measurement series, sorted by measuring points
Graphical representation of different measuring locations, measuring devices and samples over a freely selectable period of time at a glance
Excel export for local data analysis
GPS localisation of your measuring devices on a vector map in the browser
Easy integration of additional measuring devices
No additional software required
TÜV-certified server in accordance with ‘Trusted Site Infrastructure (TSI) V3.0 Level 1’

Alert AI & Sentry

(coming soon)

Alert AI
With the upcoming Alert AI feature, deviations in the sewage system are detected early on thanks to AI-supported anomaly detection. This allows problems to be identified more quickly and resolved in a targeted manner.

The Sentry option expands these possibilities: fingerprint comparisons can be used to identify even individual sources of contamination in the collection sewer. The NEMO T thus opens up new perspectives for predictive process monitoring.